Suspension Cable bridge. Can we build this over San Juan River to connect HGMP and Turbina

PAGSASANAY SA TAGUMPAY For kaizen reports: You must post pictures under this template duly classified. Answer and provide pictures for all headings. COMPLY AND UNDERSTAND. 1. Pics of office (storage, files)/chapel, cr. Also post pictures of your staff in complete uniform daily with id for am talk) STRICT COMPLIANCE 2. Pics of site (the park) beautification/construction 3. Pics of warehouse inside and outside; SHOW INVENTORIES AND LOCKS 4. Pics of inventory of equipment (especially of those non operating) and materials 5. Pics of operational equipment

Can we build this?   Will DPWH or City Engineering office approve this?

                                                         Stayed design

                                                           Traditional swaying bridge

Guide in Casket Selection - wood and metal casket

BE a BIDDA: "BELIEVE, INSPIRE, DREAM, DO ACHIEVE"

What makes a great chapel?

Here are the findings of a customer and market research

The following makes for a great chapel (and its service)

1.  Great location

2. Plenty of parking space (say up to 50 vehicles

3. Well lighted

4.  Paking well secured 

5. Chapel construction:

         1. Water supply

        2.  No power interruption  (with genset)

       3. With kitchen (common clean)   dirty and grille

       4.  Tolda for extra number of visitors

      5.  Faily room

       6. Well lighted and ventilated (AC or electric fan)

          (right from the start, ventilation (natural) can be thought in chapel design

 6.  Ambiance

         1.  Pious

         2.  Solemn

         Elegant

Let us benchmark other lampost

TO         Brenn

CC:        Ed B

Subject:    Lampost Design and PDCA -  please benchmark

Situation background:

1.  Right after November 1, 2012, I requested for plan and proposal for the construction of Lamp Post to accommodate metal halide and it called for few posts that are omni directional and equipped with ladder and cage for access by electrician.  I guess the height was for 30 to 40 ft and called for massive design and structure.

2.  However:

      1.  The proposal slept in many desk for 11 months;   the engineer gave it the cmo for budget, the cmo and the controller did not attend to this;  and the project engineer could only point to these causes why the project was not started at all

     2.  The new technology called for LED with lower intensity and lumens

     3. The redesign was presented sometime in September and much lower post were needed only 20 ft;  I requested for a redesign for 20 ft post.

3.  Then all of sudden Brenn requested for the approval of a lamp post project that was 20 ft, had horizontal bars;  however the cost and the design LOOKED AS OVER OR EXCESSIVE.

i  LOOKED AT OTHER MALLS WITH 20 FT LAMP POSTS AND TRIED TO COMPARE THIS WITH OUR DESIGN:

      Lamp post:     20 ft 6 inches with cage and horizontal bar schedule?

      Pedestal:    1.5 meter  1.5 meter hgt from ground 2.2 meter

                         base plate 14 inches x 14 inches (thk unknown with 8 studs no gusset, 

      The design was apparently applicable to  a much higher lamp post that needs access facility and safety for servicing the lamp post (replacing bulbs)  However we have much lower post (20ft) that can be accessed by stairs and does not need additional accessories.

The following pictures reflect more economical and more practical design:

They looked like:

20 ft tall, 5 inches post, with gusset support, (4 to 6 inches - 3/8,  pedestal of say 30 cm visible or more, 4 anchor bolts (maybe 20 to 22 mm)  6 x 6 baseplate..  Let us cost down and make our design more efficient?

                                       At Megamall, the pedestal looks like 30 to 40 cm

                                     

                                       Baseplate at Megmall;   6 x 6 inches, 1/2 thk, 4 bolts

                                          Lamp post at starmall crossing, 20 ft maybe 5 inches

                                                   The lamp attachment

                                          8 inches x 8 inches base plate with 4 bolts;  no Gusset

                                          Attachment points for lamps at the end of the post;  details

                                                  At Jollibee Turbina:

                                  8 inch by 8 inch base plate, maybe 1/2, with 4 bolts, only 20 mm;   galvanized

                                              Other view of base plate

Bottom view of the details of lamp attachment (reverse of base plate;  with angle bar and drilled holes for ready installation/attachment)

                                               Another efficient base plate design

                                           20 fr tall lamp post with thin maybe 4 inches posts.

CONFIDENTIALITY NOTICE/disclaimer:   The information contained herein is strictly confidential in nature and is the property of Holy Gardens Group and intended only for the intended recipient and its  retransmittal , reuse,reprinting or taking action other than the intended party is strictly prohibited. Holy Gardens assume no responsibility liability arising from such unauthorized use.

Great quotes on marketing and design

Let us have ears that can hear, minds that can understand, hearts that can feel, hands that can do...Let us read and understand these posts

These are great slides on marketing and promise to stretch your marketing genius:(from Slideshare)

30 best Creative, Design & Marketing 
Quotes from Mike Hendrixen